TOAD OBD Software Scantool Interface/EML327 DRIVERS

TOAD OBD Software Scantool Interface/EML327 DRIVERS
.

All you need now is some test OBD software to check if you can connect to your car.

Let’s get started…

Step 1: Download,


extract and install this test OBD software. Do not launch it until Step 4 below.

Step 2: Connect your ELM327 USB scan tool interface to your laptop and car.

Any of these scan tools will work: ELM327 ElmElectronics, ELM327 China Clone, ElmScan 5, OBDLink, Autotap AT1, AT2, AT3, AT123 (v2.x), VIA LDV100, LDV200, LDV300, LDV123, Multiplex Engineering T16, ELM320, ELM322, ELM323 (v2.x), ELM327 (all versions), Any SAE-J2534 compliant OBD-II interface., OBDPro, All-In-One, OBDKey

Step 3: Turn on car ignition.

Step 4: Launch EasyOBD. It will automatically connect.

If everything is working fine — you will get all 5 green lines in the software.

If you get first 3 green, and last 2 red — this means your car is not OBD2 compliant. If this is the case, don’t panic! Contact us, tell us your car model/year and we’ll confirm and recommend what scantool interface you need to scan your vehicle.

ELM 327 CABLE USB/BLUETOOTH DRIVERS DOWNLOADS

(1)ELM 327 DRIVER 1 Toad Diagnostics 1 CP210x_VCP_Windows

(2)ELM DRIVER Toad diagnostic 2 PL2303_Prolific_DriverInstaller_v1.8.0

(3) ELM 327 DRIVER Toad diagnostic 3 CDM_v2.10.00_WHQL_Certified_FTDI

(4) ELM 327 Toad diagnostic 4 CH340-USB-Driver

TOAD OBD Software Engine Scantool Interface

 

Share